Parted Magic 2023_05_21 (hdparm v9.63) Secure Erase Log Started: Sat Sep 23 17:43:57 CDT 2023 Finished: Sat Sep 23 17:44:07 CDT 2023 System Information (dmidecode 3.3) Manufacturer: HP Product Name: HP Laptop 15-dw0xxx Version: Type1ProductConfigId Serial Number: CND0227F1C SSSTC CV8-8E128-HP (/dev/sda) SERIAL NUMBER: UHANC01ZTDOHRS SIZE:119.2G RESULTS:Successfully Erased Secure Erase Method: Normal Secure Erase Verification Level N/A ================================================== SSSTC CV8-8E128-HP (/dev/sda) ================================================== hdparm v9.63 /dev/sda: ATA device, with non-removable media Model Number: SSSTC CV8-8E128-HP Serial Number: UHANC01ZTDOHRS Firmware Revision: V881 Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0 Standards: Supported: 11 10 9 8 7 6 5 Likely used: 11 Configuration: Logical max current cylinders 16383 0 heads 16 0 sectors/track 63 0 -- LBA user addressable sectors: 250069680 LBA48 user addressable sectors: 250069680 Logical Sector size: 512 bytes Physical Sector size: 4096 bytes Logical Sector-0 offset: 0 bytes device size with M = 1024*1024: 122104 MBytes device size with M = 1000*1000: 128035 MBytes (128 GB) cache/buffer size = unknown Form Factor: unknown (0x0007] Nominal Media Rotation Rate: Solid State Device Capabilities: LBA, IORDY(can be disabled) Queue depth: 32 Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max = 2 Current = 1 Advanced power management level: disabled DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * SMART feature set Security Mode feature set * Power Management feature set * Write cache * Look-ahead * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * DOWNLOAD_MICROCODE Advanced Power Management feature set * 48-bit Address feature set * Device Configuration Overlay feature set * Mandatory FLUSH_CACHE * FLUSH_CACHE_EXT * SMART error logging * SMART self-test * General Purpose Logging feature set * 64-bit World wide name * WRITE_UNCORRECTABLE_EXT command * {READ,WRITE}_DMA_EXT_GPL commands * Segmented DOWNLOAD_MICROCODE * unknown 119[6] unknown 119[8] unknown 119[9] * Gen1 signaling speed (1.5Gb/s) * Gen2 signaling speed (3.0Gb/s) * Gen3 signaling speed (6.0Gb/s) * Native Command Queueing (NCQ) * Phy event counters * READ_LOG_DMA_EXT equivalent to READ_LOG_EXT * DMA Setup Auto-Activate optimization Device-initiated interface power management * Software settings preservation unknown 78[7] Device Sleep (DEVSLP) * SMART Command Transport (SCT) feature set * SCT Write Same (AC2) * SCT Error Recovery Control (AC3) * SCT Features Control (AC4) * SCT Data Tables (AC5) * SANITIZE_ANTIFREEZE_LOCK_EXT command * SANITIZE feature set * CRYPTO_SCRAMBLE_EXT command * BLOCK_ERASE_EXT command * DOWNLOAD MICROCODE DMA command * WRITE BUFFER DMA command * READ BUFFER DMA command * Data Set Management TRIM supported (limit 8 blocks) * Deterministic read ZEROs after TRIM Security: Master password revision code = 65534 supported not enabled not locked not frozen not expired: security count supported: enhanced erase 4min for SECURITY ERASE UNIT. 4min for ENHANCED SECURITY ERASE UNIT. Logical Unit WWN Device Identifier: 538f601610053ca5 NAA : 5 IEEE OUI : 38f601 Unique ID : 610053ca5 Device Sleep: DEVSLP Exit Timeout (DETO): 40 ms (drive) Minimum DEVSLP Assertion Time (MDAT): 31 ms (drive) Checksum: correct smartctl 7.2 2020-12-30 r5155 [x86_64-linux-6.2.0-20-generic] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: SSSTC CV8-8E128-HP Serial Number: UHANC01ZTDOHRS LU WWN Device Id: 5 38f601 610053ca5 Firmware Version: V881 User Capacity: 128,035,676,160 bytes [128 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: M.2 TRIM Command: Available, deterministic, zeroed Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-4 (minor revision not indicated) SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Sep 23 17:44:07 2023 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 100 050 Pre-fail Always - 0 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 915 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2998 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 173 Unknown_Attribute 0x0032 097 097 005 Old_age Always - 73 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 5 176 Erase_Fail_Count_Chip 0x0022 100 100 000 Old_age Always - 95 181 Program_Fail_Cnt_Total 0x0022 001 001 000 Old_age Always - 0 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x003b 100 100 097 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 194 Temperature_Celsius 0x0022 026 046 000 Old_age Always - 26 (Min/Max 25/34) 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 201 Unknown_SSD_Attribute 0x0023 097 097 005 Pre-fail Always - 1927 241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 327710 242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 618489 243 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 624186 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 0 Warning: ATA Specification requires self-test log structure revision number = 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.